|
Formulae for Compression Springs Calculations
Compression Springs ordered to load requirements when the following detail is requested:
- Free Length (F/L)
- Load in lbf, N or Kgf at loaded length (L/L)
- Rate lbf load per inc (kgf) load per mm.
- Maximum compression
- Maximum solid length
- Diameter, maximum outside (O/D), minimum inside (I/D) or mean diameter (M/D)
- Right hand or left hand wound, if essential
- Type of ends (see right hand column)
- Material and finish
- Tolerances and special working conditions
Parallel, Barrel or Conical Shaped Compression Springs
Compression Springs ordered to dimensional requirements when the following detail is requested:
- Free Length (F/L)
- Diameter, maximum outside (O/D), minimum inside (I/D)
- Wire size (d) and section.
- Number of coils, working or total or pitch
- Right hand or left hand wound, if essential
- Type of ends
- Material and finish
- Tolerances and special working conditions
Compression Springs Materials
- Carbon Steel
- Stainless Steel
- Phosphor Bronze
- Brass
- Beryllium Copper
- Oil Tempered Steel
- Other materials to special order
Compression Spring Wire Diameter Range
Automatic Coiling: 0.25mm - 3.00mm
Hand Coiling: 3.00mm - 5.00mm
|
|
|
